Eco Extraction using Hydrodynamic Cavitation and Water

SDR2000 Hydrodynamic Cavitation Extraction

sdr core processor

Aqueous Turbine Extraction Technology

Under development for the past three years, Infinity is taking extraction to a new level of processing technology for extraction of full spectrum hemp oil.

Using rotating elements in series allows the processor to do in-line continuous feed extraction, and optional separation, wax removal, distillation, and isolate.

Push-button operation allows inexperienced operators to run this system. We've found with our CO2 processors that operator training is essential to making profit, but that element is the weakest link of a hemp extraction operation when operators refuse training, or know better than our expertise.

Mounted in standard shipping containers, this plug-and-play system is ready to operate on delivery. Power with 3-phase 480V service.

Since water is the solvent in a closed-loop process, the need for any permitting is reduced or eliminated.

The only consumables are water and power. Power can be sourced from renewables, such as solar or microturbines to take advantage of Federal tax credits.

This is the only eco-friendly extraction process that is good for your workers, good for the consumers, and good for the environment. It’s also good for profit.

Using a eco-extraction process is not only good for the environment, but great for the consumer. A higher buy price will give you better profit margin on processing.

Consumables (such as slippage, which is a huge cost for ethanol processors) are eliminated, which can virtually pay for a SDR system over time.

Energy sourced from microturbines or renewables, such as solar, make available substantial tax credits for your primary consumable, power. This makes your operation more competitive, compared to other processors.

Introducing the Infinity Supercritical SDR X Core Processor (PDF Download)

Silver Nanoparticle Production $14 per gram from botanical sources

Spinning Disc Reactor for Nanoparticle Production to make $24 million per year

For the full review, please download our pdf: 20190425-infinity-supercritical-sdr-nanoparticle-review

Spinning Disc Reactors, or SDRs, are a very new type of processing unit that has had new applications discovered every year.

A big field of interest as of lately has been process intensification which is a design approach that focuses on smaller, cleaner, safer, and more energy efficient processes. One design that has received considerable attention as of late has been the spinning disc reactor (SDR). Its basic design includes one or more liquid streams being flowed onto a quickly rotating disc.

The centrifugal acceleration from the rotation creates a very thin liquid film which significantly heightens the mass transfer and micro-mixing ability of the liquid streams. It also is a continuous feed reactor which can be applied to many processes that have relied on large volume and high residence time designs like batch or continuously stirred tank reactors (CSTR).

While the SDR can be used for many different processes, it excels greatly in a specific few. These include processes that rely on precipitation and uniformly mixed reactants. These traits allow for SDRs to be used in the bottom-up production of nanoparticles, where particles are created through nucleations and subsequently crystal growth. This is where batch reactors and CSTRs aren’t as easily applied due to their high volumes and lack of sufficient mixing ability. “Top-down” processing where bulk material is ground down into nanoparticles is typically avoided when trying to achieve nanoparticles of a certain size and narrow size distribution due to the lack of control over the process.

In 2010, the global market for quantum dots was low, sitting at $67 million [27]. It was projected to have an amazing 59.3% compound annual growth rate, which was mostly realized and by 2016 it has become a $610 million global market (with the estimated CAGR it was predicted to reach $670 million by 2015) [28]. The current growth rate is estimated at 41.3% now for 2016 to 2021, predicting the global market to reach $3.4 billion by 2021 [28].

Both silver and titanium dioxide nanoparticles have a realized and open market to enter with predicted growth and new applications coming out consistently. The cost to produce the materials is rather low and the production ability seems high enough, especially with silver, that a company could actively pursue using an SDR to produce the nanoparticles with success. Since the proof of concept and idea is already detailed, there would be a low cost of entry into these markets as well. The revenue from such could be used to support R and D into quantum dots or pharmaceutical nanoparticles.

Strategy: (prices updated on 5 January 2021)

Silver Nano Particles Production at $14.25/gram Sell Price ($285/20/ml):

[Note: these are 2017 figures. For 2021 double the figures below.] If silver nanoparticles of 99% purity or higher can be produced anywhere in the range of 10 nm – 40 nm, they can be sold at a wholesale price of $3+ a gram ($6/gram in 2021). To undercut the market to allow for entry I assumed a price of $2 a gram ($4/gram in 2021). This comes out to be about $24 million a year in revenue for 2017 ($48 million in 2021). As seen in Table 15, this comes out to about $12 million a year in profit for 2017 ($24 million a year for 2021). Referencing Section 2.21, a producer with the production rate would have a 1.56 percent market share of the global market. Green Synthesis Silver Nanoparticles from Astragalus PDF Download

Aqueous Turbine Technology

Gas leverage turbine: point-of-use, on-demand, tunable phase change (solubility of botanical in liquid), for water process reactions.  The underlying science is hydrodynamic sonochemistry.

The basic concept was developed back in 2004 for the rapid conversion (green chemistry) of liquid CO2 into fuel-grade ethanol, methanol, and butanol.

The same technology can be used for cell lysis (current) and in-situ fractionalization of isolate (future development). The core technology is a series of devices on a common shaft, similar to a air breathing turbine, but this one uses water. Patented. Sonochemistry Explained


The advantages of a water based solvent and using SDR technology:

1. Eco-Extraction: pure water is used as the solvent. Produces a more pure product for the customer. Similar sized ethanol processors which use a batch process may spend more than $1,200,000 per year in ethanol consumable (termed slippage) per year.

2. Small Footprint SDR2000: four 20 ft. shipping containers provide a modular extraction facility. Larger extraction systems use 40 ft. shipping containers.

3. Proven Technology: Spinning Disc Reactors and hydrodynamic cavitation is well-proven in the food processing and pharmaceutical industry.

4. No Fire Code Restrictions: unlike high pressure and volatile solvents, water processing extraction has minimal code compliance.

5. GMP: systems are built to GMP standards.

6. Silent Closed-Loop Operation: The extraction system runs with a low audible footprint. The system is closed-loop to conserve water.

7. Most Energy Efficient Extraction System Available: Because water is the solvent, the system is the most energy efficient process in the industry. CO2 requires high pressure (and maintenance prone) special pumps, and some like Apex Supercritical require noisy air compressors.

8. Better Environment for Workers: since water is used as the solvent, there are no volatile (i.e. flammable) materials to handle. There are also no airborne chemicals to breathe in or need for huge air exhaust systems.

9. Full Spectrum Oil Right Out of the Machine – Craft Extraction: the SDR produces a full spectrum crude oil right out of the system. This can be combined with a carrier oil (i.e. coconut oil) and bottled for direct sale to the consumer. The oil is rich in all extracted components, and may be further processed in to lower value isolate which is in high demand everywhere.

10. Push-Button Operation: because high pressure or volatile solvent operation is not needed, the flows of water can be controlled by a SCADA computer system which has lower worker input.

11. Rapid Oil Extraction: this is the fastest extraction method available, and accomplished by instantaneous hydrodynamic cavitation. Cell lysis occurs in under a second.

12. Dual Flow: the extraction system has a dual-flow processing circuit, which allows either system to be paused for maintenance, while the system is still performing the extraction process.

13. Plug-and-Play: the system is build into four (or more) modules, which can be shipped anywhere in the world, and set up indoors, or outdoors. The modules are connected together by modular power and water conduits for rapid installation. Typically a system can be ready for extraction in a few days.

14. Raw Input: you can back-up your walking floor trailer or other storage system to convey into the SDR hopper, in whole bud or flower format. The SDR does the rest.

15. Wet or Dry: we recommend you dry prior processing, so that you can store your flower without any mold or degrade. This gives you a much longer processing window then trying to process out of the field without drying. Longer term storage necessitates drying of the flower, then bagging (vacuum bag or freezer) storage to preserve valuable components.

16. Fast ROI: the return on investment is fast, due to the larger processing capacity, and lower solvent consumable costs. Payback time is typically a few weeks or less.

17. Continuous Feed: this is the only extraction system on the market that is continuous feed. All other botanical oil extraction systems are batch processing (you put into a vessel, where it is extracted over time).

18. Wave of the Future: this type of processing is not only good for the enviroment, and workers, it is also good for the consumer. With government and local regulations, it will quickly become the standardized method of pure oil extraction.

19. Reduces Bottleneck at Harvest Time: this method of fast and efficient extraction will reduce the bottleneck which batch processors experience at harvest time. SDR processors can use their machines to offer toll-processing (contract processing) for other farmers, or groups with large amounts of botanicals.

20. Made in the USA: the SDR was developed and is manufactured in the USA.

21. Better than Ultrasound Assisted Extraction: UAE involves the use of ultrasound ranging from 20 kHz to 2000 kHz. The mechanic effect of acoustic cavitation from the ultrasound increases the surface contact between solvents and samples and permeability of cell walls.

Physical and chemical properties of the materials subjected to ultrasound are altered and disrupt the plant cell wall facilitating release of compounds and enhancing mass transport of the solvents into the plant cells. The procedure is simple and relatively low cost technology that can be used in both small and larger scale of phytochemical extraction.

The benefits of UAE is mainly due reduction in extraction time and solvent consumption. However, use of ultrasound energy more than 20 kHz may have an effect on the active phytochemicals through the formation of free radicals.

Source: (see link below).

22. Processes Dry Hemp Flower: Any system that processes wet hemp flower is prone to breakdown, mold, mildew, and other nutrient depleting processes associated with decomposition.

We recommend that hemp flower is separated from the plant at harvest, dried, and bagged (or vacumm bagged for better preservation). A dry hemp flower has better shelf life prior processing. A Review on the Extraction Methods Use in Medicinal Plants, Principle, Strength and Limitation

Tax Credit by Using Microturbine or Solar for Power

If you are producing your own power for your processing facility, you may access the USA 10 percent microturbine or CHP tax credit, or up to 30 percent for solar energy.

All industrial SDR units are 480V 3-phase power.

For more information please visit:

IRS Info:

From the website:

Microturbines: The credit is equal to 10% of expenditures, with no maximum credit limit stated (explicitly). The credit for microturbines is capped at $200 per kW of capacity. Eligible property includes microturbines up to two megawatts (MW) in capacity that have an electricity-only generation efficiency of 26 percent or higher.

Combined Heat and Power (CHP):

The credit is equal to 10 percent of expenditures, with no maximum limit stated. Eligible CHP property generally includes systems up to 50 MW in capacity that exceed 60 percent energy efficiency, subject to certain limitations and reductions for large systems. See the note at the bottom of this page for more details. The efficiency requirement does not apply to CHP systems that use biomass for at least 90 percent of the systems energy source, but the credit may be reduced for less-efficient systems. This credit applies to eligible property placed in service after October 3, 2008.

Solar Technologies: Eligible solar energy property includes equipment that uses solar energy to generate electricity, to heat or cool (or provide hot water for use in) a structure, or to provide solar process heat. Hybrid solar lighting systems, which use solar energy to illuminate the inside of a structure using fiber-optic distributed sunlight, are eligible. Passive solar systems and solar pool-heating systems are not eligible.

Power For Your Water Extraction Facility: 480 V 3-Phase Power. If you do not have 3-phase power, we can also quote a Capstone Turbine gas or LPG (or even diesel or vegetable oil powered) microturbine system, container mounted. One containerized system can produce 1 megwatt (1,000 kW). In the USA, you may be eligible for a 10 percent tax credit (up to 2 MW up through 2021) to install a microturbine, as well as access to power producer gas rates. If you pay more than $.10 a kwh for power, this may be a consideration.

From Baker Tilly: The Investment Tax Credit (ITC) Section 48 allows project owners or investors to be eligible for Federal business energy investment tax credits for installing designated renewable energy generation equipment placed in service during the period 2006 through 2024. Most recently amended by the Bipartisan Budget Act in March of 2018, this evolving program continues to be a source of significant value to both renewable energy project developers, and forward-thinking commercial and industrial energy consumers. Investment Credit Property

Spinning Disc Reactor Experimental Cart for Showing Hydrodynamic Cavitation

Spinning Disc Reactor Prototype for Sale

Includes: industrial cart with swivel casters, experimental cavitation discs, spare parts. Also includes a centrifuge to experiment with separating liquids. Domestic USA crate and freight anywhere lower 48 USA $2,500.

Please call or email for pricing.

Features and Design of Experimental Cart System:

Power: 110V 60hz plug. AC to DC variable speed drive. DC motor drive for SDR assembly.

Dimensions: Unit measures 24 inches wide x 48 inches length x 54 inches height. Fits through any USA standard door, hallway, and elevator.

Construction: Powder coated caster beams (bolt together beams) and laser cut clear acrylic table top, back and lower shelf. Caster beams are easily reconfigured using 3/8 bolts/fasteners. Beams have 3/8 inch bores for fasteners, and 3 inch diameter cut-outs for easy access to fasteners, or providing access to wiring or other internal beam contents.

Mobility: Heavy duty industrial 5 inch swivel and lock casters.

SDR Assembly: SDR modular blocks and bolt together with quick release toggle, which allows rapid reconfiguration of internal shaft mounted SDR discs. Multiple cavitation format discs are included. Magnetic coupling for sealed rotating assembly. Multiple input and exit ports on blocks allow multiple configurations. Glass sight viewports for camera and lighting. Sensor ports for pressure, temperature, or other sensors. Vertical solid state liquid heating vessel. When run in cavitation mode, you will hear a gravel-like sound which indicates cavitation of water. In addition, there will be an absence of light present when using a flash light or laser through viewport when water cavitation is in full process. This is not a botanical processor, but rather an experimental system to show cavitation. The most asked question is the ability for continuous flow cavitation, and that cavitation provides the process to extract oil from botanicals. This system allows you to experiment with these issues. This is a low pressure system using patented modular blocks. Seals are designed to contain liquid only (not a pressurized system). System designed for water and oil only. While oil does not cavitate, oil-to-oil extraction is possible and happens quickly with this method of rotating discs. There are several studies which suggest that oil-to-oil extraction is viable and has extraction rates much better than some ethanol extraction processes, but this is something you would have to verify. System can easily be configured for extraction, but that process would be your responsibility.

High Technology Applications: This same SDR (Spinning Disc Reactor) technology can also be used to produce silver nanoparticles and other hi-tech (liquid battery and component) manufacturing. This technology may be a huge impact for manufacturing for companies like Quantum Scape and Ambri liquid metal technology. This system may also be adapted for recycling lithium batteries.

Can You Build This System On Your Own ? Yes, of course you can. But expect about a 12 month trial-and-error process. We use our own patented modular block system, which allows for rapid prototyping and integration from testing to market. What you are buying is time. The time savings alone will easily pay for the system very shortly. In addition, we already have 5 years of botanical extraction experience under our belts, which includes CO2 and water phase change cavitation science experience since 2004.

Sale Conditions: System sold as-is, no warranty,and no guaranty on extraction rates as a experimental system. System is sold with no support. Support may be available as a paid option (depending on application).

Demonstration: If you would like to pay for a demonstration of water cavitation, we are able to arrange a showing in Madison, Wisconsin with a signed NDA (no photos or video during demonstration since we’ve seen people try to do fund-raising activities after we have done demo’s). We also offer other paid demonstrations with solution (oil) HPLC testing results. We have access to a HPLC located a few blocks away from our facility.

Availability: System is in a crate and ready for shipment.

SDR Pricing Request

hemp investor strategy

How to cash in on the USA Hemp Oil Market

The problem with the hemp market is lack of extraction facilities of full spectrum hemp oil from the hemp flower. There are lots of growers, but few extractors. Even fewer CO2 extractors, which brings a much higher oil price, since CO2 retains valuable flavor and medicinal rich terpenes compared to other methods. Most processors don’t have qualified legal oil extract.

The best strategy to start is to buy a CO2 extraction system, number up, then ultimately move up to the large industrial processor using continuous feed water extraction. This provides a clear path to profit and solidifies a vertical system from hemp flower extraction to sales. These systems are offered by Infinity Supercritical.

Hemp Investor Strategy and Methodology: How to invest in the lucrative hemp oil extraction market (PDF Download)

sdr 2000 eco extraction

SDR 2000 Eco Extraction Using Hydrodynamic Cavitation and Water

The SDR 2000 uses water as the solvent and is closed-loop. Using standard temperatures and pressures, this system does extraction in under a second. It is a 24/7 continuous process.

Infinity Supercritical

Model: SDR2000

Dry Botantical Flower Input (lbs/day): 2,400

Full Spectrum Oil (kg/day): 87

Revenue Per Day: $476,328

Payback (days): 6

Based On $/gram: 6

Aqueous Extraction. One Touch Craft Extraction.

Consumables: Water (closed loop) and Power.

Comparison to Ethanol Extraction - Savings Per Year from Consumable Slippage: $1200000

SDR 2000 ROI Information (PDF download)

sdr 10k eco extraction

SDR 10k (10,000 lbs per day) Eco Extraction Using Hydrodynamic Cavitation and Water

The SDR 10k uses water as the solvent and is closed-loop. Using standard temperatures and pressures, this system does extraction in under a second. It is a 24/7 continuous process.

Infinity Supercritical Model: SDR10K

Dry Botantical Flower Input (lbs/day): 9,984

Full Spectrum Oil (kg/day): 362

Revenue Per Day: $1,985,412

Payback (days): 8

Based On $/gram: 6

Aqueous Extraction. One Touch Craft Extraction.

Consumables: Water (closed loop) and Power.

Comparison to Ethanol Extraction - Savings Per Year from Consumable Slippage: $4,992,000

SDR 10k ROI Information (PDF download)

sdr 50k eco extraction

SDR 50k (50,000 lbs per day) Eco Extraction Using Hydrodynamic Cavitation and Water

The SDR 50k uses water as the solvent and is closed-loop. Using standard temperatures and pressures, this system does extraction in under a second. It is a 24/7 continuous process.

Infinity Supercritical Model: SDR50K

Dry Botantical Flower Input (lbs/day): 49,992

Full Spectrum Oil (kg/day): 1,815

Revenue Per Day: $9,950,406

Payback (days): 5

Based On $/gram: 6

Aqueous Extraction. One Touch Craft Extraction.

Consumables: Water (closed loop) and Power.

Comparison to Ethanol Extraction - Savings Per Year from Consumable Slippage: $24,996,000

SDR 50k ROI Information (PDF download)

sdr 100k eco extraction

SDR 100k (100,000 lbs per day) Eco Extraction Using Hydrodynamic Cavitation and Water

The SDR 100k uses water as the solvent and is closed-loop. Using standard temperatures and pressures, this system does extraction in under a second. It is a 24/7 continuous process.

Infinity Supercritical

Model: SDR100K

Dry Botantical Flower Input (lbs/day): 100,008

Full Spectrum Oil (kg/day): 3,632

Revenue Per Day: $1,991,593

Payback (days): 5

Based On $/gram: 6

Aqueous Extraction. One Touch Craft Extraction.

Consumables: Water (closed loop) and Power.

Comparison to Ethanol Extraction - Savings Per Year from Consumable Slippage: $50,004,000

SDR 100k ROI Information (PDF download)

sdr 300k eco extraction

SDR 300k (300,000 lbs per day) Eco Extraction Using Hydrodynamic Cavitation and Water

The SDR 300k uses water as the solvent and is closed-loop. Using standard temperatures and pressures, this system does extraction in under a second. It is a 24/7 continuous process.

Infinity Supercritical Model: SDR300K

Dry Botantical Flower Input (lbs/day): 288,000

Full Spectrum Oil (kg/day): 10,460

Revenue Per Day: $5,731,360

Payback (days): 5

Based On $/gram: 6

Aqueous Extraction. One Touch Craft Extraction.

Consumables: Water (closed loop) and Power.

Comparison to Ethanol Extraction - Savings Per Year from Consumable Slippage: $144,000,000

SDR 300k ROI Information (PDF download)

What is this ?

Infinity Supercritical is now deploying its QR code based system. This e commerce and system operation strategy allows equipment components and items to be referenced.

Try it yourself. Scan the code to the left and it will bring up this page automatically on your smartphone browser.

Why use this technology?

We're using QR codes to enable operators/processors to quickly access information for support, maintenance, and parts reordering.

The QR code saves time. And time is money.

This helps to reduce or eliminate user manuals, support, and other items which bog down a processor.

All of our SDR equipment comes with QR code labels that allow operators to quickly ascertain flows, component, and operational standard operating procedures.

This allows our systems to quickly contribute to your bottom line - profit.

What is a QR code ?

QUICK LINK REFERENCE Bitcoin and other cryptocurrency now accepted MENU

Now Available Supercritical CO2 Design NFT: Infinity Supercritical is the first in the botanicals industry to offer its 10L Supercritical CO2 Extractor as a NFT. As the owner of the NFT, you can resell, license, and manufacture the industry proven hemp extractor with worldwide rights. As the owner of the NFT, you get the sales proceeds of any 10L system (less manufacturing costs from Infinity if you do not opt-out). For more info... More Info

$79,000 Complete CO2 Extraction System: New crated machines ready to ship... More Info

Infinity Supercritical CO2 10 Liter Extractor Design and Worldwide Rights: NFT for our 10L design... More Info

Pro Tips and Training for CO2 System: More Info

Technology for Supercritical CO2 Extraction: More Info

Video for Infinity Supercritical CO2: More Info

Parts for Sale (pumps, seals, valves): More Info

Payback on Extractor System as short as 11 days (ROI): More Info

$29,000 new 10L Demo CO2 Extractor: Process your hemp fall harvest with our very affordable 10L Supercritical CO2 extractor... More Info

CONTACT TEL: +1-608-238-6001 Email: (Standard Web Page) | PDF