Infinity Supercritical Cannabis Oil Extraction Machine

Botanicals Oil CO2 Extraction System: Supercritical CO2 Fluid Extraction systems for botanical oil extractions of cannabis, cannabidiol, CBD, cannabinoids, hemp, flax, terpenes, fragrance, nutraceuticals, ginseng, tamanu, oregano, and beer hops. First in the industry to develop a spinning disc continuous feed reactor for organic oil extraction with water, Electrostatic Precipitation, FlowBar, SolidState Chiller, and CO2 pump cleaning device.

Botanical Oil CO2 Extraction Links

TEL:  (720) 541-9113   

Sales and Email: greg@infinitysupercritical.com

Infinity Supercritical CO2 Fluid Extraction for Botanical Oil

CO2 Cannabis Oil Extraction Links

Lab Results From Infinity Supercritical CO2 Extraction System

Cannabis Oil Extraction  |  Beer Hops Oil Extraction

Cannabis oil CO2 extraction lab results from Infinity Supercritical machine
Cannabis oil CO2 extraction lab results from Infinity Supercritical machine
Cannabis oil CO2 extraction lab results from Infinity Supercritical machine
Cannabis oil CO2 extraction lab results from Infinity Supercritical machine
Cannabis oil CO2 extraction lab results from Infinity Supercritical machine
Cannabis oil CO2 extraction lab results from Infinity Supercritical machine
Cannabis oil CO2 extraction lab results from Infinity Supercritical machine - Test 14 using electrostatic precipitator
Citra Leaf Hops Extract with Terpenes Lab Analysis

Sample Two (November 2015):  

Closed Loop Supercritical CO2 System

1,800 psi

No heat added - Sample was from combined collection/separation vessel 1-2-3

About 1 kW (3 amps @ 230 V) pump motor

Material: Cannabis Trim and Flower - testing sample prior to post-processing

Results Page: http://analytical360.com/m/concentrates/479671

1,800 psi with no heat at 10 C and 1.5-2.5 hour cycle run time

Sample One (December 2015):  

Closed Loop Supercritical CO2 System - 5L

800 to 1,800 psi - Heat Added Via Heat Tape

About 1 kW (3 amps @ 230 V) pump motor + 1 kW Heat Tape

Material: Cannabis bad grow, outer row outdoor, cut early. Mid grade rec. Better than trim, but not much. Testing sample prior to post-processing

Sample: Taken from separation/collection vessel 1 only (2 and 3 were not combined to 1 for sample)

Results Page: http://analytical360.com/m/concentrates/486861

Starting mass = 250 grams    Room Temp = 46 degrees F   Humidity = 70%

Process - Heat used on the biomass.

Time   PSI  Temp F

0:00    800    45  F —start--

0:10    750    40 F

0:20     --15 minute shut down to change pump head--

0:30    730    40  (heat tape on biomass swithed on)

0:40    1200  73 F

0:50    1550  85 F

1:00    1800  85 F

1:10    1800  85 F

1:20    1800  89 F

1:30    1800  90 F

2:05    1800  90 F -- shut down--

Total collected = 5 grams

486861 GC Profile Infinity Supercritical
486861 Infinity Supercritical Extracted Oil Sample
486861 GC Profile Infinity Supercritical Oil Ratio of Cannabinoids Total
486861 Infinity Supercritical Extracted Oil Sample

Sample One (December 2015):  

Closed Loop Supercritical CO2 System - 5L

800 to 1,800 psi - Heat Added Via Heat Tape

About 1 kW (3 amps @ 230 V) pump motor + 1 kW Heat Tape

Material: Cannabis bad grow, outer row outdoor, cut early. Mid grade rec. Better than trim, but not much. Testing sample prior to post-processing

Results Page: http://analytical360.com/m/concentrates/486861

Starting mass = 250 grams    Room Temp = 46 degrees     Humidity = 70%

Process - Heat used on the biomass.

Time   PSI  Temp

0:00    800    45  --start--

0:10    750    40

0:20     --15 minute shut down to change pump head--

0:30    730    40  (heat tape on biomass swithed on)

0:40    1200  73

0:50    1550  85

1:00    1800  85

1:10    1800  85

1:20    1800  89

1:30    1800  90

2:05    1800  90  -- shut down--

Total collected = 5 grams

486861 GC Profile Infinity Supercritical Oil Ratio of Cannabinoids

1,800 psi with heat at 10 to 30 C and 2.0 hour cycle run time

Sample Two (December 2015):  

Closed Loop Supercritical CO2 System - 5L

800 to 1,800 psi - Heat Added Via Heat Tape

About 1 kW (3 amps @ 230 V) pump motor + 1 kW Heat Tape

Material: Cannabis bad grow, outer row outdoor, cut early. Mid grade rec. Better than trim, but not much. Testing sample prior to post-processing

Results Page: http://analytical360.com/m/concentrates/486866

Starting mass = 260 grams Room Temp = 42  F Humidity = 72%

Sample: Taken from separation/collection vessel 1 only (2 and 3 were not combined to 1 for sample)

Process - Heat used on biomass. 4 heat pads used on collection vessel one.

Time  PSI   Temp F

0:00   1400 44 F  -- start-- (Heat on)

0:10   1600 50 F

0:20   1800 54 F

0:30   1800 56 F

0:40   1800 60 F

0:50   1800 64 F

1:00   1800 66 F

1:10   1800 70 F

1:20   1800 74 F

1:40   1800 78 F

1:50   1800 86 F

2:00   1800 88 F

2:15   1800 88 F

2:30   1800 89 F

2:45   1800 90 F

4:00   1800 90 F  --shut down

total collected = 15 grams

486866 Infinity Supercritical GC Profile of Sample
486866 Infinity Supercritical GC Profile of Sample Ratio of Cannabinoids
486866 Infinity Supercritical GC Profile of Sample Ratio of Cannabinoids Totals
486866 Infinity Supercritical GC Photo of Extracted Cannabis Oil
486866 Infinity Supercritical GC Photo of Extracted Cannabis Oil Magnified
486866 Infinity Supercritical GC Photo of Extracted Cannabis Oil In Separation Vessel
486866 Infinity Supercritical GC Photo of Extracted Cannabis Oil In Separation Vessel Magnified
486866 Infinity Supercritical GC Photo of Extracted Cannabis Oil Thawing
486866 Infinity Supercritical GC Photo of Extracted Cannabis Oil Thawing In Sample Jar
486866 Infinity Supercritical GC Photo of Extracted Cannabis Oil Thawing in Jar
486866 Infinity Supercritical GC Photo of Extracted Cannabis Oil In Separation Collection Vessel

Sample One (December 2015):  

Closed Loop Supercritical CO2 System - 5L

800 to 1,800 psi - Heat Added Via Heat Tape

About 1 kW (3 amps @ 230 V) pump motor + 1 kW Heat Tape

Material: Cannabis bad grow, outer row outdoor, cut early. Mid grade rec. Better than trim, but not much. Testing sample prior to post-processing

Results Page: http://analytical360.com/m/concentrates/486861

Starting mass = 250 grams    Room Temp = 46 degrees     Humidity = 70%

Process - Heat used on the biomass.

Time   PSI  Temp

0:00    800    45  --start--

0:10    750    40

0:20     --15 minute shut down to change pump head--

0:30    730    40  (heat tape on biomass swithed on)

0:40    1200  73

0:50    1550  85

1:00    1800  85

1:10    1800  85

1:20    1800  89

1:30    1800  90

2:05    1800  90  -- shut down--

Total collected = 5 grams

1,800 psi with heat at 15 to 30 C and 4.0 hour cycle run time

Sample One (November 2015):  

Closed Loop Supercritical CO2 System

1,800 psi

No heat added - Sample was from combined collection/separation vessel 1-2-3

About 1 kW (3 amps @ 230 V) pump motor

Material: Cannabis Trim and Flower - testing sample prior to post-processing

Results Page: http://analytical360.com/m/concentrates/476372

15.94% TERPENE-TOTAL

Terpenes                                        

< 0.01% Linalool

< 0.01% Caryophyllene oxide

5.97% Myrcene

< 0.01% beta-Pinene

< 0.01% Limonene

2.00% Terpinolene

< 0.01% alpha-Pinene

3.71% Humulene

4.26% Caryophyllene

15.94% TERPENE-TOTAL

1,800 psi with no heat at 10 C and 1.5-2.5 hour cycle run time

Cannabis oil CO2 extraction lab results from Infinity Supercritical machine
Cannabis oil CO2 extraction lab results from Infinity Supercritical machine
Run 11 Shatter
Cannabis oil CO2 extraction lab results from Infinity Supercritical machine
Clean filter using electrostatic pricipitator to collect Cannabis oil
Oil extract using electrostatic pricipitator to collect Cannabis oil
Oil extract using electrostatic pricipitator to collect Cannabis oil
Oil extract using electrostatic pricipitator to collect Cannabis oil
Cannabis oil CO2 extraction lab results from Infinity Supercritical machine using patent pending electrostatic precipitation
Cannabis oil CO2 extraction lab results from Infinity Supercritical machine - Test 14 using electrostatic precipitator - pre test lab analysis of Cannabis flower
Cannabis oil CO2 extraction lab results from Infinity Supercritical machine - Test 14 using electrostatic precipitator
20160613 Hops Oil Supercritical CO2 Fluid Extraction Infinity Supercritical

6/10/16 Hops Run @ 1850psi  4hr cycle run time

Type: Citra Leaf Hops

Start:  10:00am    End: 2:00pm

Ambient Start: 600 psi

Ambient Finish: 600 psi

Air Temp: 55F    Humidity:  80%    Pressure:   29.82 inHg

Start Weight: 227g

End Weight:  183g

Oil Collected:  24g (CC1 less than 1g, CC2 23g)

Water/Terpenes Collected:  19g

 

Run Parameters: Extraction Vessel (92F, 1350psi), CC1 (75F, Ambient), CC2 (70F, Ambient), CC3 (Ambient Heat and Pressure)

 

Summary: Completed run with nice oil color and good volume. We clocked in at 10%. Yields and color have been very good.

Hops Oil Run - Citra Leaf Hops - June 13, 2016

Citra Leaf Hops Extract with Terpenes
Citra Leaf Hops Extract with Terpenes
Citra Leaf Hops Extract with Terpenes

Hops Oil Run - Citra Leaf Hops - June 16, 2016